It embodies understated luxury, a delicate gold line punctuated with precious pearls that seem to float on the skin. The "Station" necklace, also known as the "Tin Cup," is a piece of fine jewelry celebrated for its minimalist elegance. Its secret? A precise assembly technique that integrates pearls directly into the chain.
At La Fille du Sud, we believe that true luxury lies in craftsmanship. That's why we're revealing the secrets behind the making of this iconic piece of jewelry.
1. The Creator's Shopping List (The Essentials)
For this project, the quality and consistency of supplies are key.
-
The Channel: It needs to be thin, but strong.
-
The Ideal Choice: OUR 1mm curb chain . Its links are easy to work with.
-
Quantity : For a 42cm necklace with 5 stations, allow approximately 35cm of chain.
-
-
The "Stations" (The Points of Light):
That's your signature.-
Our Luxury Recommendation: Our Two-Hole Gold Beads are the most professional solution. Choose them in the finish smooth , satin Or granita .
-
Quantity : Plan for 5, 7 or 9 beads for a harmonious rhythm.
-
-
The Gold Thread (For "Wrapping"):
It is used to connect the beads to the chain. It must be thin and flexible.-
Our Recommendation: OUR 0.30mm Annealed Gold Wire is perfect for this precision work. For a slightly more visible and even more robust look, our 0.50mm wire is also an excellent option.
-
-
The Clasp and the Rings:
The essential finishing touch.-
A Spring Ring Clasp Discreet will be perfect.
-
Plan for two connecting rings matching.
-
-
The Tools: A trio of pliers (flat, round, cutting).
2. The Tutorial: The "Tin Cup" Assembly Technique
The core of this project is to create "connectors" with your beads.
Step 1: Prepare the Chain Segments
Determine the desired spacing between your beads (e.g., 7 cm). Cut your chain into segments of this length. You will have one more segment than beads (for 5 beads, you will need 6 segments).
Step 2: The "Wire Wrapping" of the Pearl (The Key Gesture)
-
Cut about 5 cm from your 0.30mm gold wire .
-
Using your round-nose pliers, create a small loop at one end.
-
Wrap the excess yarn 2 or 3 times around the base of the loop to close it securely. Cut off the excess.
-
Thread your bead.
-
Create a second loop on the other side of the bead.
-
Wrap the excess yarn around the loop to close this second loop. Cut off the excess.
You have just created a perfect bead connector! Repeat the process for all your beads.
Step 3: Assembly
-
Take a segment of chain. Carefully open its last link with your pliers.
-
Insert the loop of one of your bead connectors into it. Close the link.
-
On the other side of your connector, open the loop and insert the first link of a new chain segment. Close it.
-
Continue alternating chain segment and bead connector until you reach the desired length.
Step 4: The Finishing Touch
Use your jump rings to attach the clasp to both ends of your station necklace.
Conclusion: A Jeweler's Expertise
Congratulations! You've created much more than a necklace. You've crafted your own chain, link by link. It's a technique that requires patience, but it offers immense satisfaction and a result of unparalleled professional quality.
Ready to take on the challenge?